"Shree Jee Tiles" with excellent clientele list as well as Quality manufacturers of Building Construction materials. "Shree Jee Tiles" is one of the prominent as well reliable supplier for DMRC & delivering wide range of products.Joint with contract firm of NH-72 & provide them their satellite navigation products like GPS Pillar,TBM Pillar.
Shree Jee Tiles | Manufacturing of INTERLOCKING TILES, PRECAST RCC DRAINS, CURB STONES, MANHOLE COVER, RCC DRAIN COVERS, CONCRETE FENCES Shree Jee Tiles | Manufacturing of INTERLOCKING TILES, PRECAST RCC DRAINS, CURB STONES, MANHOLE COVER, RCC DRAIN COVERS, CONCRETE FENCES
Shree Jee Tiles + (91)-9729351013
Shree Jee Tiles nitinsharma@shreejeetiles.in
 
 
 
  Products  » Curb Stones    
 
FEATURES & SPECIFICATION
  » KK uses wet casting in the manufacture of all kerb stones
  » KK products provide consistent long term performance
  » All kerb stones are made from concrete mix design with a minimum 28 day compressive strength of 30MPa .    
 
Kerb Stone Type 1
SJ-01 (300x250x100)
SJ-01a (900x250x100)
SJ-02 (500x300x125)
SJ-03 (250x300x125)
SJ-04 (500x315x150)
SJ-05 (300x300x150)
SJ-05a (900x300x150)
SJ-06 (400x375x200)
SJ-07 (900x250x150)
SJ-08 (300x250x150)
SJ-08a (600x300x125)
SJ-18 (600x250x100)
kerbstone SJ-18
SJ-19 (600x300x100)
kerb stone SJ-19
SJ-19a (600x375x150)
kerb stone SJ-19a
SJ-21 (600x250x150)
kerbstone SJ-21
SJ-22 (300x250x150)
kerb stone SJ-22
SJ-23 (150x250x150)
kerb stone SJ-23
 
 
Kerb Stone Type 2
SJ-09 (300x300x150)
SJ-09a (900x300x150)
SJ-10 (500x250x100)
SJ-11 (450x300x100)
SJ-12 (450x225x75)
SJ-13 (300x350x75)
SJ-14 (300x450x150)
SJ-20 (600x150x150)
kerb stone SJ-20
 
 
Kerb Stone Type 3
SJ-17 (500x225x50)
   

    SJ 1800X200 HeightX150/200 - Wheel Stopper

  • Overall Dimensions: 1800 mm Length X 200 mm Height X 150 mm Top Width / 200 mm Bottom Width
  • Manufactured by using M-30 grade of concrete using vibro-compaction process using jointless moulds
  • Reinforced with 4 Nos of 8 mm dia Tor Steel & 6 mm dia Stirrup @ 150 mm c/c along the length
  • Provided with a slot of 600 X 75 mm in the centre & at bottom for water drainage & 2 holes of 20 mm dia through out the depth of kerb for fixing the nails for the purpose of anchoring the kerb to the ground.


Note: COST OF NAILS NOT INCLUDED
 

    Triangular Wheel Stopper

  • Overall Dimensions: 2500mm (Base Length) X 125mm (side of equilateral triangle)
  • Manufactured by using M-30 grade of concrete by vibro compaction process using jointless moulds
  • Suitably Reinforced
  • Provided with 2 holes of 20 mm dia throughout the depth of the kerb for fixing the nails for the purpose of anchoring the kerb to the ground.
     
 
 
Home / About Us / Products / Quality / Infrastructure / Contact Us
  2014 © Shree Jee Tiles. All Rights Reserved.  
Powered By  webmartindia